Applications Overview - Siemens RDF301 Basic Documentation

Application and output signal
Remote configuration
via commissioning tool (factory setting)
 Synco ACS
 ETS3 professional
(Parameter and application download with
ETS3 will be implemented later)
Heating or cooling
 2-pipe fan coil unit
(heating or cooling)
 Chilled / heated ceiling
(heating or cooling)
 1-stage compressor
(heating or cooling)
 2-pipe fan coil unit
(heating or cooling)
 Chilled / heated ceiling
(heating or cooling)
Heating or cooling with electric heater
 2-pipe fan coil unit with electric heater
(heating or cooling)
 Chilled / heated ceiling with electric heater,
(heating or cooling)
 1-stage compressor with electric heater,
(heating or cooling)
22 / 80
Siemens
Building Technologies
3.4

Applications overview

The thermostats support the following applications, which can be configured using
the DIP switches inside the front panel of the unit or a commissioning tool.
All DIP switches need to be set to OFF (remote configuration, factory setting) to
select an application via commissioning tool.
The tool offers the applications printed in bold text (basic applications).
For universal applications (chilled ceiling, etc.), refer to section 3.6.6.
For compressor applications, refer to subection 3.6.7.
ON/OFF
ON/OFF
ON/OFF
3-position
3-position
ON/OFF
ON/OFF
ON/OFF
RDF301, RDF301.50 Basic documentation
Functions
DIP switches Diagram
ON
1 2 3
ON
1 2 3
ON
1 2 3
ON
B2
1 2 3
T
B2
T
T
(B1)
Y1
M1
T
(B1)
YE
T
(B1)
Y1
M1
T
(B1)
CE1P3171en
22 Jun 2010