Refrigerator Features; Dell Bin; Wine Rack - Kenmore WIOI67097A Use & Care Manual

Avoid connecting theicemaker toa softened water s upply.
Water softener chemicals (such assalt) c andamage p arts of
theicemaker andlead topoor q uality i ce.Ifasoftened water
supply c annot beavoided, make sure thewater s oftener is
operating properly andiswell m aintained.
• It isnormal fortheicecubes t obeattached atthecorners.
They will b reak a part e asily.
• ForStyle 1icemaker, donotforce the wireshutoff arm upor
down.
• Donotstore anything ontopoftheicemaker orintheice
storage b in.
REFRIGERATOR FEATURES
Your model may have some or all of these features. Features that
can be purchased separately as product accessories are labeled
with the word "Accessory." Not all accessories will fit all models.
If you are interested in purchasing one of the accessories, please
call the toll-free number on the back cover or in the
"Accessories" section.
important information to know about glass shelves
and covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
For your protection, tempered glass is designed to shatter
into many small, pebble-size pieces. This is normal. Glass
shelves and covers are heavy. Use special care when
removing them to avoid impact from dropping.
Your model may have glass or wire shelves. Store similar foods
together and adjust the shelves to fit different heights. This
reduces the time the refrigerator door is open and saves energy.
Shelves and Shelf Frames (Fixed and Slide-out)
To Remove and Replace a Shelf:
1. Pull the shelf forward to the stop. Tilt the front of the shelf up.
Lift to remove from the shelf supports.
2. Replace the shelf/frame by aligning the shelf with the shelf
supports. Slide the shelf onto the shelf supports. Be sure that
the shelf is securely in position.
..... . ...................... ""<:U" "_"< "'* ..... .s ,+,,,I,}Y@W( [
,jYl. _is:,._;_;::_ ( ]
Crisper and Convertible Vegetable Meat Drawers
To Remove and Replace Drawers:
1. Slide crisper or meat drawer straight out to the stop. Lift the
front of drawer with one hand while supporting the bottom of
drawer with other hand and slide the drawer out the rest of
the way.
2. Replace the crisper or meat drawer by sliding it back in fully
past the drawer stop.
Crisper or Vegetable/Meat Drawer Covers
To Remove and Replace Covers:
1. Remove the crisper and meat drawers. Press up in center of
crisper glass insert until it rises above the plastic frame.
Holding the crisper glass firmly, slide the glass insert forward
to remove.
2. Lift crisper cover frame and remove. Repeat steps to remove
the meat drawer cover.
3. Replace back of meat drawer cover frame into supports or
slides on side walls of the refrigerator and lower or slide the
front of the cover frame into place.
4. Slide rear of glass insert into cover frame and lower front into
place. Repeat steps to replace the crisper cover.
WilIe D ,.,v., _ ,.
I 111]!%_<I'%
IO['__;:;01 _ ;_ P" odets
- _IiI'!;<?tiSOy%
To Install and Remove the Wine Rack:
1. Install the wine rack by aligning it with the three shelf tabs
located on the bottom of the shelf. Pull the wine rack straight
down until it locks onto the shelf tabs as shown.
The dell drawer stores raisins, nuts, spreads, and other small
items at normal refrigerator temperatures.
To Remove and Replace the Dell Bin:
1. Remove the dell bin by sliding it straight out to the stop. Lift
the front and back of the bin up and out of the shelf supports.
Tilt the bin sideways to remove from the refrigerator
compartment.
2. Replace the dell bin by sliding it back past the stop and
pushing into place.
2.
To remove the wine rack, lift it straight up and off the shelf
tabs.
14