Refrigerator Features - Kenmore 596.52673200 Use & Care Manual

[ CAUTION j
To avoid property damage or injury, observe the following:
• Cenfin'n shelf is secure before placing items on shelf
• Handle tempered glass shelves carefully Shelves may
break suddenly "rfnicked, scratched, or exposed to sudden
temperature change
i i
Door Storage
nl i i iii
F
Milk Savor
TM
(some models)
The temperature-controlled Milk Savor
TM
keeps beverages and ether items up to 5° F
(3 ° C) colder than the rest of the fresh food
section Air inlet allows air from the freezer
section to pass to Milk Savor
TM
The Milk Savor
TM
control is located
on the left wall of fresh food section
Control adjusts amount of air circulating in
Milk Savor
TM
Turn control clockwise for colder
temperature
To remove and install Milk Savor TM"
If located directly above Milk
SavorT_,%dairy center or door _=_'tl
bucket may need to be removed I I_ I IJ
Refer to appropriate instructions I_1
and remove item Slide Milk SavorT_I
assembly up and pull straight out -_
To install, align one of the
Milk Savor' cold air intake _c:::_lll ]
holes (A)with one of the two /,_ _,4_{}H.B
air inlets (B) in door liner
ACq_E=_I {H{{l
Push assembly down onto "_Eq]l=_lijl t
door liner retainer until it stops _" _"_l'_l]t ]
IMPORTANT: Milk Savor
TM
wil! not operate properly if
air intake holes are not aligned with air inlet in door
Iiner
Dairy Center
The dairy center provides convenient storage for items
such as butter, yogurt, cheese, etc
This compartment is an adjustable feature located in
the door It can be moved to several different locations
to accommodate storage needs
To remove and install bin: _% _ !
• To remove, slide dairy center up
and pull out
To install, slide assembly in /_/_
above desired door liner
retainer and push down until it
stops
To remove and install dairy door:
To remove, press in sides of dairy door and pull out.
To install, slide sides of dairy door inside dairy
center until hinge points snap into place
Refrigerator Features
Door Storage
"Tilt-Out Door Buckets (some models)
The Tiit-Out Bucket assembly consists of a bucket and frame,
providing adjustable, convenient storage for food items in door
The bucket assembly tilLsforward for easy access of items, and
lifts out for ease in cleaning and adjusting
To remove and install bucket:
To remove bucket, tip bucket forward
and pull straight out to remove
To instail bucket, slide bucket into bucket
frame and push bucket upright
To adjust bucket frame:
",.Y_&|l tin
•
Remove bucket per above instructions
• Lift frame off door support and place in
,. desired door location
Door Buckets
Door buckets adjust to meet individual
storage needs
To remove and install buckets:
Lift the door bucket up until it clears the
retainers on the door liner, then pull the door
bucket straight out
To install, sfide bucket in above desired door
liner retainer and push down until bucket stops
Shelves
Spillproof Shelves
Spillp_of stationary shelves hold
simple spills for easier cleaning
To remove and install shelves:
To remove shelves, lift front of shelf to
release shelf hooks from metal track
and pull out to remove
To instal! shelves, select point in metal track for replacement
and insert shelf hooks. Raise front of shelf until hooks lock
into place Lower shelf front,
Drawers
ill llll i iil,llUl, ill ,,,IH
F
Snack Drawer __1_
This drawer can be used for storage of
food items or extra produce
To remove and install snack drawer:
To remove, putl drawer out to full
extension Tilt up front of drawer and
pul{ straight out
To install, reverse above procedure
11