Page 2
Turn off power to the computers and monitors. Disconnect the monitor cable from a CPU and reconnect it to VID 1 on the rear of the VOPEX-3V-SE-2 (see Fig.1). A monitor must be connected to VID 1 for the VOPEX-3V-SE-2 to work properly.
Green/Yellow Ground STATUS LEDS There are three LEDs on the front of the VOPEX-3V-SE-2 Video Splitter/Switch (see Fig. 2). The LEDs will indicate the state of the VOPEX-3V-SE-2 Video Splitter/Switch. INDICATION VOPEX-3V-SE-2 has been supplied with the proper power supply (+24VDC)
TROUBLESHOOTING PROBLEM SOLUTION No Video • Make sure the power LED is illuminated on the VOPEX-3V-SE-2 • Check cable connections, make sure they are secure Poor Resolution • Make sure monitors are fully plugged into connectors of VOPEX-3V-SE-2 WARRANTY INFORMATION The warranty period on this product (parts and labor) is one (1) year from date of purchase.
Need help?
Do you have a question about the VOPEX-3V-SE-2 and is the answer not in the manual?
Questions and answers