Understanding The Colors Of The Sleep Button And Indicator Lights; Using The Embedded Web Server - Lexmark CS410 Series User Manual

Learning about the printer
Use the
3 Arrow buttons Scroll through menus, or settings on the display.
4 Keypad
5 Sleep button
6 Stop button
7 Back button
8 Home button
9 Indicator light Check the status of the printer.
10 Front USB port Connect a camera or flash drive to the printer.
Understanding the colors of the Sleep button and indicator
lights
The colors of the Sleep button and indicator lights on the control panel signify a printer status or condition.
Indicator light
Off
Blinking green
Solid green
Blinking red
Sleep button light
Off
Solid amber
Blinking amber
Blinking amber for 0.1 second, then goes
completely off for 1.9 seconds in a slow,
pulsing pattern

Using the Embedded Web Server

Note: This feature is available only in network printers or printers connected to print servers.
To
Enter numbers, letters, or symbols.
Enable Sleep mode or Hibernate mode.
Notes:
•
Pressing any hard button, attaching a device to a USB port, sending a print job, or
performing a power-on reset with the main power switch wakes the printer from Sleep
mode.
•
Pressing the Sleep button or the power switch will cause the printer to wake from Hibernate
mode.
Stop all printer activity.
Return to the previous screen.
Go to the home screen.
Printer status
The printer is off or in Hibernate mode.
The printer is warming up, processing data, or printing.
The printer is on, but idle.
The printer requires user intervention.
Printer status
The printer is off, idle, or in Ready state.
The printer is in Sleep mode.
The printer is entering or waking from Hibernate mode.
The printer is in Hibernate mode.
14