Loading Paper And Specialty Media; Setting The Paper Size And Type; Configuring Universal Paper Settings - Lexmark CS410 Series User Manual

Loading paper and specialty media

Loading paper and specialty media
The selection and handling of paper and specialty media can affect how reliably documents print. For more information,
see "Avoiding jams" on page 132

Setting the paper size and type

1
From the printer control panel, navigate to:
> Settings >
2
Press the up or down arrow button to select the tray or feeder size, and then press
3
Press the up or down arrow button to select the paper size, and then press
4
Press the up or down arrow button to select the tray or feeder type, and then press
5
Press the up or down arrow button to select the paper type, and then press

Configuring Universal paper settings

The Universal paper size is a user‑defined setting that lets you print on paper sizes that are not preset in the printer
menus.
Notes:
•
The smallest supported Universal size is 76 x 127 mm (3 x 5 inches) and is loaded only in the multipurpose
feeder and manual feeder.
•
The largest supported Universal size is 215.9 x 359.9 mm (8.5 x 14.17 inches) and is loaded only in the
multipurpose feeder and manual feeder.
1
From the printer control panel, navigate to:
> Settings >
measure >
2
Press the up or down arrow button until Portrait Height or Portrait Width appears, and then press
.
3
Enter the preferred settings using the keypad or press the left or right arrow button to manually select the size you
want, and then press
4
Press .
and "Storing paper" on page
> Paper Menu > > Paper Size/Type >
> Paper Menu > > Universal Setup >
.
48.
.
.
> Units of Measure >
31
.
.
> select a unit of