Connecting The Printer To A Wireless Network Using The Embedded Web Server - Lexmark CS410 Series User Manual

Additional printer setup
Using the Push Button Configuration (PBC) method
1
From the printer control panel, navigate to:
> Settings >
Wireless Connection Setup >
2
Follow the instructions on the printer display.
Using the Personal Identification Number (PIN) method
1
From the printer control panel, navigate to:
> Settings >
Wireless Connection Setup >
2
Copy the eight‑digit WPS PIN.
3
Open a Web browser, and then type the IP address of your access point in the address bar.
Notes:
•
The IP address appears as four sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
4
Access the WPS settings. For more information, see the documentation that came with your access point.
5
Enter the eight‑digit PIN, and then save the setting.

Connecting the printer to a wireless network using the Embedded Web Server

Before you begin, make sure that:
•
Your printer is connected temporarily to an Ethernet network.
•
A wireless network adapter is installed in your printer and working properly. For more information, see the
instruction sheet that came with the wireless network adapter.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer control panel. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > Network/Ports > Wireless.
3
Modify the settings to match the settings of your access point (wireless router).
Note: Make sure to enter the correct SSID, security method, preshared key or passphrase, network mode, and
channel.
4
Click Submit.
>Network/Ports >
> Wi‑Fi Protected Setup >
>Network/Ports >
> Wi‑Fi Protected Setup >
> Network [x] > > Network [x] Setup >
> Start Push Button Method >
> Network [x] > > Network [x] Setup >
> Start PIN Method >
29
> Wireless > >
> Wireless > >