Reports Menu - Lexmark CS410 Series User Manual

Understanding the printer menus
Use
Feed Direction
Short Edge
Long Edge

Reports menu

Reports menu
Use
Menu Settings Page
Device Statistics
Network Setup Page
Network [x] Setup Page
Profiles List
Print Fonts
PCL Fonts
PostScript Fonts
Print Demo
Demo Page
[list of available demo pages]
Asset Report
To
Specify the feed direction if the paper can be loaded in either direction.
Notes:
•
Short Edge is the factory default setting.
•
Long Edge appears only when the longest edge is shorter than the
maximum width supported in the tray.
To
Print a report containing information about paper loaded in trays, installed
memory, the total page count, alarms, timeouts, the printer control panel
language, the TCP/IP address, the status of supplies, the status of the network
connection, and other information.
Print a report containing printer statistics such as supply information and details
about printed pages.
Print a report containing information about the network printer settings, such as
the TCP/IP address.
Note: This menu appears only in network printers or printers connected to
print servers.
Print a report containing information on network printer settings, such as the
TCP/IP address information.
Notes:
• This menu item is available only when more than one network option is
installed.
• This menu item appears only in network printers or in printers connected
to print servers.
Print a list of profiles stored in the printer.
Print a report in English of all the fonts available for the printer language currently
set in the printer.
Note: A separate list is available for PCL and PostScript emulations. Each
emulation report contains print samples and information about the available
fonts for each language.
Print demo files that are available in the RIP code, the flash option, and the disk
option.
Print a report containing asset information including the printer serial number
and model name. The report contains text and UPC bar codes that can be scanned
into an asset database.
69