Kenmore 596.50012100 Use And Care Manual page 22

SABBATH
MODE
This mode is intended to deactivate
power to the LED and dispenser lights,
while allowing the controls to remain
operational. No visual or audio alarms
will be available while in this mode.
To activate and deactivate Sabbath
Mode:
> To activate, press and hold both the
LOCK/UNLOCK and ON/OFF
buttons simultaneously for 3 seconds.
After 3 seconds, the LED and
dispenser lights will turn off.
Dispenser light will not activate
during dispensing while in this
mode.
> To deactivate, press and hold both
LOCK/UNLOCK and ON/OFF
buttons simultaneously for 3 seconds.
After 3 seconds, the LED and
dispenser lights will activate.
NOTE: In the event that power is
interrupted while the Sabbath Mode is
active, the control will remain in Sabbath
Mode when power returns.
AUTO DISPLAY
The auto display controls the illumination
of the LED display based on the light
readings received from the SENSOR. If
the SENSOR indicates low light levels,
the display will be dimmer than if
displaying during weINit periods.
To set the power level of the display:
Press and hold both the
ON/OFF button and the
freezer Y button for 3 seconds. The
current active state will show in the
display by using AL O for on, AL A
for auto.
> Use the refrigerator _,_ _" button to
scroll through the display states.
Activate the chosen setting by
pressing the CONFIRM
SETTINGS button.
NOTE: The letters AL will always show
in freezer temperature display while in
this mode.
TEMPERATURE
CONVERSION MODE
This mode is available to change
the temperaturedisplay between
Fahrenheit and Celsius.
oF
oc
To change current temperature
reading:
Press the DISPLAY ON/OFF and
buttons simultaneouslyfor 3 seconds.
HIDDEN
LOCKOUT FOR
UPPER KEYPAD
The purpose of this mode is to prevent
tampering with the upper set of
dispenser controls. This includes the
Display On/Off, Max Freeze, Max Cool,
Vacation Mode, and Temperature Set
functions.
To activate and deactivate Hidden
Dispenser Lockout:
To activate, press the LOCK/
UNLOCK and DISPLAY OFF buttons
simultaneously for 3 seconds.
To deactivate, press the LOCK/
UNLOCK and DISPLAY OFF buttons
simultaneouslyfor 3 seconds.
ON/OFF FUNCTION
The ON/OFF function turns off cooling to
the fresh food and freezer sections while
allowing the lights and electronic display
to stay on. The dispenser functions will
not be available while in this mode.
To deactivate and activate refrigerator:
To deactivate, press the freezer -_
button until the readout registers
beyond the maximum allowable
freezer temperattJre.At this point, the
LED will read OFF. Press the
CONFIRM SETTINGS button to
confirm the selection.
To reactivate, press the freezer v
button. Press the CONFIRM
SETTINGS button to confirm the
selection.
NOTE: After reactivation, the display
will show temperature setting previously
in use. See the section How to Adjust
the Temperature Controls (page 12)
for instructions on how to set food
compartment temperatures.
To a_oid electrical ShockWhiCh Can
Causesevere personalinju_or
death, DO NOT perform maintenance
or service on refrigerator unless
refrigerator is unplugged.
22