Care And Maintenance Instructions; Preventative Maintenance Checklist - Matrix E5x-02 Service Manual

3.3 carE and MaintEnancE inStrUction
In order to maximize life span, and minimize down time, all
MATRIX equipment requires regular cleaning, and maintenance
items performed on a scheduled basis. This section contains detailed
instructions on how to perform these items, the frequency of which
they should be done, and a check list to sign off each time service
is completed for a specific machine. Some basic tools and supplies
will be necessary to perform these tasks which include (but may not
be limited to):
* Metric Allen wrenches
* #2 Phillips head screwdriver
* Adjustable wrench
* Torque wrench (capability to read foot lbs, and inch lbs)
* Lint free cleaning cloths
* Teflon based spray lubricant
* Mild, water soluble, detergent – such as "Simple Green", or other
Matrix approved product
* Teflon based spray lubricant such as "Super Lube", or other Matrix
approved product
* Vacuum cleaner with an extendable hose and crevasse tool
attachment
You may periodically see addendums to this document, as the
Matrix Technical Support Team identifies items that require specific
attention, the latest version will always be available on the Matrix web
site, www.matrixfitness.com
6
cHaptEr 3: prEVEntatiVE MaintEnancE
DailY maintenance items
1) Look and listen for loose fasteners, unusual noises, and any
other indications that the equipment may be in need of service.
2) Clean the elliptical trainer before and after each use, including:
a. Use a damp, soft cloth with water or mild liquid detergent to
clean all exposed surfaces. DO NOT use ammonia, chlorine, or any
acid based cleaners.
b. Keep the console display free of fingerprints and salt build
up caused by sweat.
c. Frequently vacuum the floor beneath the unit to prevent the
accumulation of dust and dirt which can affect the smooth operation
of the unit.
montHlY maintenance items
1) Inspect the console, handrails, link arms, pedal arms, and pedals
for damage.
2) Check the link / pedal arms for loose joints, tighten hardware as
needed.
3) Check pedal motion and stability.
4) Adjust leveling feet if the equipment rocks or wobbles.
5) Remove the rear shroud, and clean the rollers / tracks to prevent
flat spots caused by dust / dirt.
QuarterlY maintenance items
1) Remove the front shrouds and check belts for damage,
alignment, and proper tension.