Table of Contents
Advertisement
4.
TRADEMARKS
Consider It Solved and Intelligent Store are trademarks and Emerson Climate Technologies and the
Emerson Climate Technologies logo are service marks and trademarks of Emerson Electric Co.
Windows and Internet Explorer are registered trademarks of Microsoft Corporation in the United States and
other countries.
Oracle and Java are registered trademarks of Oracle and/or its affiliates.
Google and Google-Chrome are a registered trademark of Google Inc.
Firefox is a registered trademark of the Mozilla Foundation.
Yahoo! is a registered trademark of Yahoo! Inc.
Linux is a trademark registered to Linus Torvalds.
Other names may be trademarks of their respective owners.
5.
ACCESSORIES
TYPE
Serial
compatible PDA, 56kbps.
MODEM
Compatible network cable,
CABLE
3m
Compatible crossed network
CABLE
cable, 1m
6.
FAQS
6.1
MAINTENANCE PROCEDURE
Should it be necessary to disconnect the XWEBEVO to move it or for cleaning purposes, remember that it
should not be opened for any reason, or the warranty will be deemed invalid. Follow the procedure below,
observing the rear panel figure as per the installation manual. The same is provided in paper form in the
package and in electronic form on the Dixell website, under section "Manuals".
Press and quickly release the on/off power button (2);
Wait for all LEDs on the front to go off, including the PWR;
Disconnect external modem, if present (7);
Disconnect parallel printer or USB (6);
Disconnect monitor, keyboard and mouse (5);
Disconnect the telephone line and/or LAN network cable(4);
Disconnect RS485 terminals, relay and digital input (3)
Now disconnect the power supply cable (1) and move the XWEB;
Press and hold button (2) to force the instant switch-off of the system. When switch-off
occurs in this way, the XWEB records the event, but cannot guarantee the correct data
maintenance. The same applies for "forced" switch-offs which occur when the power
supply cable is disconnected before the system is switched off.
6.2
I CANNOT ACCESS THE SYSTEM WITH MY PASSWORD
Check upper and lower case. The XWEB-EVO system is sensitive to the letter case.
6.3
MY BROWSER CANNOT REACH THE XWEB-EVO
Check the cables in use starting from that connected to your PC's network. Once the cables have been
checked, check that the XWEB-EVO IP address can be reached: run the PING command from the command
line to verify the correct routing of the packs on the network.
1592010880 XWEB3000_5000 EVO OPR GB r1.0 2014.11.28
DESCRIPTION
analogue
modem,
NAME
XWEBMODEM-200
XWEB MODEM
XWEBMODEM-400
XWEBMODEM-500
###
###
HOW TO ORDER
24Vac
110Vac
230Vac
CAB/WEB/NET
CAB/WEB/PC
94/100
Advertisement
Table of Contents
