Table of Contents
Advertisement
3.5.5
DESKTOP PARAMETERS
The "Parameters" desktop allows the user to read and modify the parameters of the controllers connected to
the device network.
3.5.5.1 PARAMETER READING
Select the device of interest and possibly the specific group of interest of the parameters to be read. Select
"Read" from the menu on the right-hand side and run "Execute". The page will be updated with the
parameter list. Loading depends on the number of parameters and the connection speed.
The following columns are defined:
Sel:
box for selecting the parameters to be exported.
ID:
parameter index
Label:
parameter description
Value:
current value of parameter
Min./Max.:
interval of value admitted for the parameter
Udm:
unit of measure
Description:
description of parameter function
3.5.5.2 PARAMETER WRITING
Select the device of interest and run the parameter reading. Once run, modify the parameter value by
accessing the "Value" column.
Once all parameters of interest are modified, select "Write" and press "Execute". The XWEB-EVO will open
the list of all compatible devices on which you can perform "writing". Select those of interest and press "Ok".
3.5.5.3 PARAMETER MAP SAVING
The parameters can be saved on a PC or locally in the XWEB-EVO memory; for use in other installations or
for their use at a later date.
Select the device of interest and run the parameter reading. Once executed, press "Save". The XWEB-EVO
will open a window requesting where to save the parameter map of the selected device. Select "EVO backup
folder" to save in the XWEB-EVO memory or select "Client download" to save the map with your browser. If
the map has been saved on a browser, a ZIP file will be downloaded as demonstrated below.
1592010880 XWEB3000_5000 EVO OPR GB r1.0 2014.11.28
91/100
Advertisement
Table of Contents
