Xweb System Setup; Introduction; Homepage And Navigation Bar - Emerson XWEB3000 EVO Operating Manual

3.3

XWEB SYSTEM SETUP

3.3.1

INTRODUCTION

In its configuration, the XWEB-EVO system requires connection to its interface of Modbus devices. Make
sure that:
1. the controller network is suitably connected paying particular attention to the configuration of the
device addresses, to avoid non-admitted duplications.
2. all instruments are properly powered. Create the list of all connected instruments. Then compare
this list with the number of instruments effectively detected by means of the automatic procedure
The XWEBEVO allows for the management of different device lines (also called "nodes"), which can use
different types of physical connections and configurations for communication. Obtain the network
documentation.
3.3.2

HOMEPAGE AND NAVIGATION BAR

The page that the XWEB-EVO displays on login is the "Desktop Overview". This is further detailed later in
the manual, in the section relating to Desktops.
The user can also browse the other main pages that are grouped in the DESKTOPS menu of the navigation
bar. Or in other pages, typically for configuration, present in the MENU section.
The navigation bar is always visible on all pages and it enables the user to run the LOGOUT, in other words,
to display the interface on the page requesting the username and password.
The user is provided with additional information in the navigation bar, such as:

Date and time of system

Information on connected user

State of access block to "non-admin" users.
Click on the padlock icon to activate and deactivate the block: a dialog will appear to confirm the
operation. When the system is blocked an indication appears on the login page.

State of the acquisitions.

State of the alarms. At least one active with icon present
The other pages can be accessed from the navigation bar by clicking on the icons

Desktop Overview

Desktop DeviceView

Desktop Chart

Desktop Parameters

Desktop Alarms
1592010880 XWEB3000_5000 EVO OPR GB r1.0 2014.11.28
block active;
active; not active
block not active.
14/100