Table of Contents
Advertisement
3.5.4
ALARMS DESKTOP
The "Alarms" desktop enables the user to visualise the list of all controller network alarms detected by the
system.
On the initial access, the alarm list appears with the following default that can be subsequently changed by
the user:
3.5.4.1
ALARM DISPLAY FILTER
The user may use filters to
Level. To visualise only the alarms notified to a specific level. For example 'Service';
-
-
Alarm-category. To visualise only the alarms configured with a given category. For example "Serious
alarm";
-
Device type (group). To visualise only the alarms generated by a group of devices. For example "BT".
Device name. To visualise only the alarms generated by a given device. For example 'RS2-005
-
New_XW90T';
-
Alarm start period. To visualise only the alarms detected starting from a given period. For example "last
10 days" or "day/y";
-
Note. To visualise only the alarms with a note entered into the system by a given user.
-
Notification. To visualise only the alarms notified to a specific user.
Each time the filter is modified, press "Apply" to update the page. The alarm list is generated providing the
user with the following information:
1592010880 XWEB3000_5000 EVO OPR GB r1.0 2014.11.28
88/100
Advertisement
Table of Contents
