User/Book Configuration - Emerson XWEB3000 EVO Operating Manual

The configuration of a device can be imported into the Template gallery. These devices can then be setup
using the "Add/Remove Devices" section as demonstrated in the image below
3.3.5

USER/BOOK CONFIGURATION

The user configuration page allows for the configuring of the XWEB-EVO book. This book is unified
in the system for all operations involving external users. Users are intended, for example, as those who have
access to the web interface; users can also be those receiving alarm notifications.
Upon the system commissioning, there will be a single user configured and enabled: Admin. For which full
access to the Web interface in English is guaranteed. The user belongs to the "superadmin" profile.
The user with right to access this page can:

Display/modify the access rights of users
Clicking on the user list updates the section on the right-hand side of the screen with the "User Details" and
"User Permissions". To apply the changes to these system sections, press "Save" on the "Users" section. To
delete users, select the desired user and press "Delete". Attention: it is not possible to delete the
'superadmin' profile user; Attention; the user permissions may differ from those set on the profile indicated
for the same user: the profile name is that of default which was used to create the user.

Display/modify the profile rights
1592010880 XWEB3000_5000 EVO OPR GB r1.0 2014.11.28 23/100