Whirlpool Automatic Ice Maker User And Care Manual page 8

3. Remove the 2 screws from the top panel
trim and remove the top trim.
4. Carefully slide the panel out.
5. Choose the color you want to show and
carefully slide the panel back into the
lower access panel.
NOTE: Be careful not to scratch the panel
as it is inserted.
6. Replace the top trim and screws. Replace
the lower access panel assembly and
screws.
NOTE: You can make a decorative wood
front to match existing cabinets. The
panel should be W' (6 mm) thick and
17" x 11%" (433 mm x 303 mm).
Remove the color panel and spacers
to allow for wood thickness.
7. Plug in ice maker or reconnect power.