Whirlpool Automatic Ice Maker User And Care Manual page 11

Cleaning the ice maker system
1. Turn the Cycle Control Knob to "OFF."
2. Remove the 2 thumb screws and slide
the ice cutter grid forward, out of the
2 slots near the water pan.
3. Unplug the electrical harness.
NOTE: Any ice on the grid should be
melted under running warm water.
Attempting to pick the ice slab off the
grid may stretch and damage grid wires,
4. Remove all ice from the storage bin and
the freezing plate.
5. Drain the water pan by removing the
drain plug and then replace the plug.
continued on next page
11