Whirlpool Automatic Ice Maker User And Care Manual page 16

Vacation and Moving Care
Electrical Shock Hazard
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so can result in death or electrical shock.
To shut down the ice maker:
1. Unplug ice maker or disconnect power.
2. Remove all ice from storage bin.
3. Shut off the water supply.
4. Remove the 2 screws in the lower access
panel and the one screw from the center
of the front panel support. (Open bin door
slightly for better access to the screw.) Pull
the bottom forward and then pull down to
remove the lower access panel.
5. Disconnect the inlet and outlet lines to
water valve. Allow these lines to drain
and then reconnect to the valve.
6. Replace lower access panel and screws.
16