Before Setting The Oven Controls - Kenmore 790.4672 Use & Care Manual

Before Setting Oven Controls
I _ This range has a fan that will turn "ON" and "OFF" by itself to keep the electronics cool. Itmay continue
to run after the range has been turned "OFF", but may also stop immediately and then turn "ON" after a while.
Oven Vent Location
The oven is vented through its upper front frame.
When the oven is on, hot air is released through the
vents. This venting is necessary for proper air circulation
in the oven and good baking results.
OVEN VENT
Removing and Replacing Oven Racks
To remove, pull the rack forward until it stops. Lift up
front of rack and slide out. To replace, fit the rack onto
the guides on the oven walls. Tilt the front of the rack
upward and slide the rack back into place.
Arranging Oven Racks
ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO OPERATING THE OVEN). Always use
oven mitts when the oven is hot.
RECOMMENDED RACK POSITIONS FOR
BROILING, BAKING & ROASTING
Food Rack position
Figure 1
Rack
positions
i
Broiling meats, chicken or fish 3 or 4
Cookies, cakes, pies, biscuits &muffins
Using 1 rack 2 or 3
Using multiple racks 2 and 4
Frozen pies, angel food cake, yeast, bread, 1 or 2
casseroles, small cuts of meat or poultry
Turkey, roast or ham 1
Note: Always use caution when removing food.
14