Kenmore 790.4672 Use & Care Manual page 22

Setting Oven Controls (con't)
Setting Bake
............ @
The BAKE Bake" pad controls normal baking• If preheating is necessary, refer to the Preheat Feature for
instructions• The oven can be programmed to bake at any temperature from 170 ° F to 550 ° F (the sample shown below
is for 375°F).
INSTRUCTIONS PRESS DISPLAY
To set the Bake Temperature (example : 375°F)
1. Arrange oven racks, preheat if necessary and place food in oven.
2. Press Bake "350 °'' will appear and "BAKE" will flash in the Bake
display(Figure 1). If a bake of 350°F is needed, press
3. Press (_Q (_) (Figure 2). "BAKE" will continue to flash
and "375 °'' will appear in the display.
4. Press STARTA beep will sound once the oven temperature START
reaches 375 ° F and the display will show "375 °'' and "BAKE"
(Figure 3).
Pressing
_'-T°P_
will cancel the Bake feature at any time. ST_
(Z)C)(Z)
To change the Bake Temperature (example: changing
from 375°F to 425°F)
1. After the oven has already been set to bake at 375°F and the
oven temperature needs to be changed to 425°F, press
Bake
(Figure 4) and "375" will appear and "BAKE" will flash in the
display•
2. Press _'_ _ _ (Figure 5). "BAKE" will continue to flash
and "425 °" will appear in the display.
3. Press START"BAKE" and "425 °'' will stay in the display (See
Figure 6).
Note: During the first rise of temperature, the convection fan will be
activated to allow the oven to reach its target temperature faster• The
Bake, Broil and Convection elements will also cycle for a better heat
distribution•
QQQ
22
Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6