Adjusting The Oven Temperature - Kenmore 790.4672 Use & Care Manual

Slide-in models
Table of Contents

Advertisement

Self-Cleaning
(cont'd)
INSTRUCTIONS
PRESS
Stopping
or Interrupting
a Self-Cleaning
Cycle
If it becomes necessary to stop or interrupt a self-cleaning cycle
due to excessive smoke or fire in the oven:
1. Press @.
2.
Once the oven has cooled down for approximately
1 HOUR
and the "DOOR LOCKED" icon is no longer displayed, the
oven door can then be opened (Figure 1).
Note: Self-Clean cycle can never be set to start more than 12 hours in advance.
@
DISPLAY
Figure 1
Adjusting Oven Temperature
The temperature
in the oven has been pre-set at the factory• When first using the
oven, be sure to follow recipe times and temperatures.
If you think the oven is cooking
too hot or too cool for the temperature you select, you can adjust the actual oven
temperature to be more or less than what is displayed. Before adjusting, test a recipe
by using a temperature
setting that is higher or lower than the recommended
temperature. The baking results should help you to decide how much of an adjustment
is needed.
INSTRUCTIONS
To adjust the oven temperature
higher
1.
Press
for 6 seconds (Figure 2).
2.
To increase the temperature
use the number pads to enter the
desired change (Example 30°F) (_
@
(Figure 3). The
temperature may be increased as much as 35°F (19°C).
3.
Press
START to accept the temperature
change and the display
will return to the time of day (Figure 4). Press _
to reject the
change if necessary.
PRESS
Bake
START or
To adjust the oven temperature
lower
1.
Press Bake for 6 seconds. O0 will appear in the display (Figure 5).
2.
To decrease the temperature
use the number pads to enter the
desired change (Example -30°F) @
@
and then press @
(Figure 6). The temperature
may be decreased
as much as 35°F
(19°C).
3.
Press
START to accept the temperature
change and the display
will return to the time of day (Figure 7). Press _
to reject the
change if necessary.
Bake
Q@
@
START or
Note: The oven
temperature adjustments
made with this feature will
not change the Self-Clean
cycle temperature.
DISPLAY
40
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Elite 790.4672 series

Table of Contents