Table of Contents
Advertisement
The HT503 is an affordable, high-quality, integrated IP telephony solution for both the residential
customers and the 'road-warriors' who need advanced call features between traditional PSTN network
and IP network. The HT503 enables IP connectivity for any phone or fax using the FXS port and a web-
based GUI for easy configuration and installation. It functions as a true FXO gateway that enables remote
call origination and termination from/to PSTN and supports the feature of "hop-on/hop-off" using the
programmable FXO port.
SOFTWARE FEATURES OVERVIEW
The HT503 features 2 SIP account profiles and supports advanced telephony features including caller ID,
call waiting, call transfer, 3-way conferencing (with either IP or PSTN calls), and multi-language voice
prompts. From a technical standpoint, the HT503 offers a power-outage survivable life line and internet-
disconnect survivable fail-over-to-PSTN support, dual 10/100Mbps Ethernet ports with integrated high-
performance NAT router, a flexible dial plan and a broad range of popular voice codecs.
Interfaces
Protocol Support
LED Indicators
RESET Button
Device Management
FIRMWARE VERSION 1.0.12.4
PRODUCT OVERVIEW
TABLE 3: HT503 TECHNICAL SPECIFICATIONS
1 FXS telephone port (RJ11), 1 FXO PSTN line port (RJ11) with lifeline support
Two (2) 10M/100 Mbps ports (RJ45) with integrated Nat router
TCP/UDP/IP, RTP, HTTP/HTTPS, ARP/RARP, ICMP, DNS, DHCP, NTP, TFTP, PPPoE,
STUN & TELNET protocols
Power, WAN, LAN, PHONE, and LINE
Factory Reset Button
Web interface or via secure (AES encrypted) central configuration file for mass
deployment
Support device configuration via built-in IVR, Web browser or central configuration file
through TFTP, HTTP or HTTPS
Support Layer 2 (802.1Q, VLAN, 802.1p) and Layer 3 QoS (ToS, DiffServ, MPLS)
Auto/manual provisioning system
NAT-friendly remote software upgrade (via TFTP/HTTP/HTTPS) for deployed devices
including behind firewall/NAT
Syslog support
HT503 USER MANUAL
Page 13 of 64
Advertisement
Table of Contents
