Grandstream Networks HT503 FXO User Manual page 39

Via TFTP
Via HTTP
Via HTTPS
Firmware Server Path
Config Server Path
XML Config File
Password
HTTP/HTTPS User Name
HTTP/HTTPS Password
Always send HTTP Basic
Authentication
Information
Firmware File Prefix
Firmware File Postfix
Config File Prefix
Config File Postfix
FIRMWARE VERSION 1.0.12.4
This is the IP address of the configured TFTP server. If this is configured, the HT503
retrieves the new configuration file or new code image from the specified TFTP server
at boot time. After 5 attempts, the system will timeout and will start the boot process
using the existing code image in the Flash memory. If a TFTP server is configured and
a new code image is retrieved, the new downloaded image is saved into the Flash
memory.
Note: Firmware upgrades may take up to 10 minutes depending on your network
environment. On a LAN it usually takes about 2 minutes. Please do NOT interrupt the
TFTP upgrade process (especially the power supply) as this will damage the device.
Depending on the network environment this process can take up to 15 or 20 minutes
The URL for the HTTP server used for firmware upgrade and configuration via HTTP.
For example, http://provisioning.mycompany.com:6688/Grandstream/1.0.6.8
":6688" is the specific TCP port where the HTTP server is listening; Omit if using default
port 80. Note: If Auto Upgrade is set to No, F/W will download at boot time.
The URL of the HTTP server used for firmware upgrade and configuration via a secure
HTTP connection.
For example, https://provisioning.mycompany.com
Note: the HTTPS default port is 443.
IP address or domain name of firmware server.
IP address or domain name of configuration server.
The password used for encrypting the XML configuration file using OpenSSL.
This is required for the phone to decrypt the encrypted XML configuration file.
The user name for the HTTP/HTTPS server.
The password for the HTTP/HTTPS server.
Default is Send HTTP Basic Authentication Information only when challenged. If
set to Always, device will send configured user name and password within HTTP
request without server sending authentication challenge.
This field enables user to store different versions of firmware files in one single directory
on the firmware server. If configured, only the firmware file with the matching prefix will
be downloaded.
This field enables user to store different versions of firmware files in one single directory
on the firmware server. If configured, only the firmware file with the matching postfix will
be downloaded.
This field enables user to store different configuration files in one single directory on the
configuration server. If configured, only the configuration file with the matching prefix will
be downloaded.
This field enables user to store different configuration files in one single directory on the
configuration server. If configured, only the configuration file with the matching postfix
HT503 USER MANUAL
.
Page 37 of 64