Table of Contents
Advertisement
STARTING/CANCELING
A FUNCTION
After setting a function, you must press START/
ENTER to start the function. If you do not
press START/ENTER within 5 seconds of
setting, "START?" will show on the
display as a reminder. If you do not press
START/ENTER within 5 minutes of setting, the time
of day will appear. You must reset the function and
press START/ENTER.
OFF/CANCEL will cancel any function except the
I
Clock, Timer, or Oven/Cooktop
Lockouts.
_
_
When you press OFF/CANCEL, the display
i
will show the time of day or, if the minute
i
timer is also being used, the time remaining.
I
ULTRABAKE
TM
BAKING/ROASTING
Your oven is designed with the ULTRABAKE
TM
enhanced baking system to constantly monitor
oven temperature. The bake burner will cycle, as
needed, to maintain the desired temperature. This
feature is automatically activated when the oven is
in operation.
IMPORTANT: Do not try to light the oven burner
during a power failure. Never place food or
cookware directly on the oven door or the oven
bottom.
1, Place the STURDIGLIDE
TM
rack(s) where you
need them in the oven. For more information, see
the "Positioning
racks and pans" section, p. 9.
2. Press BAKE.
PRESS
YOU SEE
3. Set the temperature (optional).
Do this step if you want to set a temperature
other than 350°F. Press TEMP (A) or (T) ped(s)
to raise or lower the temperature in 5°F amounts.
Use these pads until the desired temperature
shows on the small display.
PRESS
YOU SEE
TEMP
(example for bake at 375°F)
m
15
Hide quick links:
Advertisement
Table of Contents
