Kenmore 665.75832 Use And Care Manual page 29

SEI-I'ING THE CONTROLS (contd.)
del y starttheSelf-Cl ni cycle:
NOTE: Make sure the clock is set to the correct
time of day. (See "Setting the clock" in the "Using
Your Range" section, p. 12.)
1.
Press SELECT CLEAN.
Press pad twice, SoilA (for average soil) will
replace SoilL.
Press pad three times, SoilH (for heavy soil) will
replace SoilA.
NOTE: You can scroll through all 3 settings
(SoilL, SoilA and SoilH) continuously by pressing
SELECT CLEAN.
PRESS YOU SEE
(example shows light soil
setting)
2.
Press DELAY START. PRESS YOU SEE
3. Set the start time.
Press the HOUR/MIN (&) or (V) pad(s) until the
correct time of day to start the SELECT CLEAN
Self-Cleaning cycle shows on the display.
PRESS YOU SEE
HOUR MIN
(example for 12:30 start time)
4. PressSTART/ENTER. PRESS YOU SEE
5. Once Delay Start time has been reached, the
oven begins the SELECT CLEAN
TM
Self-Cleaning
cycle.
YOU SEE
(example shows light soil
setting)
6.
After the SELECT CLEAN Self-Cleaning cycle ends:
YOU SEE
LOCKED goes off and the door unlocks.
continued on next page
29