Table of Contents
Advertisement
Troubleshooting
Most cooking
problems
are caused
by little things you can find and fix without
tools of any
kind. Check
the lists below and on the next page before
calling for assistance
or service,
RANGE DOES NOT WORK
PROBLEM
CAUSE/SOLUTION
Nothing works
• The range is not plugged into a properly grounded outlet (120v polarized).
• The range is not properly connected to the gas supply. Contact a Sears
Service Center to reconnect the range to the gas supply. (See the Installation
Instructions.)
• A household fuse has blown or a circuit breaker has been tripped.
• The Oven and Cooktop Lockouts have been set.
OVEN/BROILER
BURNER
PROBLEM
CAUSE/SOLUTION
The oven does not work
• The electronic control is not set correctly, Refer to setting the electronic
oven control section. (See pp, 11-24.)
• A delay start has been set. Wait for the start time to be reached or cancel
and reset the control.
• The main or regulator gas shutoff valve is in the off position. (See the
Installation Instructions.)
• The Oven Lockout has been set.
Burner makes muffled
• This is normal. This sound occurs when the oven burner cycles on and off
ticking noise when in use
to hold the set oven temperature.
The burner falls to light
• The ignition system is broken. Contact a Sears Service Center to replace it.
• A household fuse has blown or a circuit breaker has been tripped.
The burner flames lift
• The air/gas mixture is incorrect. Contact a Sears Service Center to check the
away from the ports, are
air/gas mixture or see the Installation instructions.
yellow, or are noisy
continued on next page
37
Hide quick links:
Advertisement
Table of Contents
