Aastra 6739i User Manual page 93

Options Key
Speeddial Prefix
The speeddial feature also allows you to specify a preset string of numbers followed by a "+" that the phone pre-dials
automatically. After pressing the speeddial key, the phone automatically dials the prefix and then waits for further digits
to be input by the user. You can use this feature for frequently dialed numbers which start with the same set of digits or
long international numbers.which contain long prefixes.
For example, if you had the following speeddial configuration:
Key 1
Type=speeddial
Label=Europe Office
Value=1234567+
Line=2
then, after you press key 1 on the phone, the prefix number displays on the phone screen. The phone proceeds to out-
put the prefix number automatically and then pauses for you to enter the remaining phone number using the keypad
on the phone.
You can use the IP Phone UI or the Aastra Web UI to create speeddial softkeys on your phone.
Configuring a Speeddial Softkey
IP Phone UI
1. Press on the phone to enter the Options List.
2. Press the <Softkeys> button. By default, all of the softkeys that display are configured as "None".
3. Press a <None> button. A softkey configuration screen displays.
4. In the "Type" field, press the <None> button. A screen displays with softkey buttons.
5. Press the <Speeddial> function button to apply to the softkey.
6. In the "Label" field, enter a label to assign to this softkey.
7. In the "Value" field, enter a value to assign to this softkey.
8. In the "Line" field, press the
9. Press <Save> to save the softkey. The softkey applies to your phone immediately and displays on your idle screen.
10.Press the to return to the previous menu or press the
86
or to select a line to assign to the softkey. Valid values are 1 through 9.
to return to the idle screen.
41-001317-00 Rev 02 – 07.2010