Aastra 6739i User Manual page 157

Managing Calls
3. For each account, in the "Number" field, enter the phone number for which you want the incoming calls to
forward to if the phone is in the specified state.
If using the "Account" mode or "Custom" mode, you can enter different phone numbers for each account.
Notes:
1. If you selected "Account" mode in step 5, you can enable/disable each account or all accounts as applicable.
You can enter different phone number for each enabled state.
If you selected "Custom" mode, you can enable/disable each account or all accounts as applicable. You can enter
different phone numbers for each enabled state.
If you selected "Phone" mode, all accounts are set to the same CFWD configuration (All, Busy, and/or No Answer)
as Account 1 on the phone. (In the Aastra Web UI, only Account 1 is enabled. All other accounts are grayed out
but use the same configuration as Account 1.)
Using the Aastra Web UI, if you make changes to Account 1, the changes apply to all accounts on the phone.
Using the IP Phone UI, if you make changes to any other account other then Account 1, the changes also apply
to all accounts on the phone. When enabling a CFWD state, you must specify a phone number for the phone to
CFWD to. The number you specify applies to all accounts of the same mode.
2. Number and name of accounts that display to this screen are dependant on the number and name of
accounts configured on the phone. In the screen in step 7, Screenname1 is configured on Line 1, Screenname2
is configured on Line 2, and Screenname3 is configured on Line 3. The name for the account is specified by your
System Administrator. Contact your System Administrator for more information.
4. For the "No Answer" state, in the "No. Rings" field, enter the number of times that the account rings before
forwarding the call to the specified number. Valid values are 1 through 20. Default is 1.
When using the "Account" mode or "Custom" mode, you can enter a different number of rings for each account.
If you use the Aastra Web UI to change the Call Forward Key Mode to "Phone", all accounts synchronize to
Account 1.
5. Click to save your changes. The changes takes affect immediately without a reboot.
150
41-001317-00 Rev 02 – 07.2010