Aastra 6739i User Manual page 155

Managing Calls
Configuring CFWD Mode Using the Aastra Web UI
Use the following procedure to configure the CFWD mode using the Aastra Web UI.
Aastra Web UI
1. Click on Basic Settings->Preferences->General.
2. In the "Call Forward Key Mode" field, select a call forward mode to use on the phone. Valid values are: Account,
Phone, Custom. Default is Account.
• Account - (default) The account mode allows you to configure CFWD on a per account basis. Pressing a con-
figured CFWD key applies to the account in focus.
• Phone - The Phone mode allows you to set the same CFWD configuration for all accounts (All, Busy, and/or
No Answer). When you configure the initial account, the phone applies the configuration to all other accounts.
(In the Aastra Web UI, only the account you configured is enabled. All other accounts are grayed out but set
to the same configuration.) Using the Aastra Web UI, if you make changes to that initial account, the changes
apply to all accounts on the phone.
• Custom - The Custom mode allows you to configure CFWD for a specific account or all accounts. You can
configure a specific mode (All, Busy, and/or No Answer) for each account independently or all accounts. You
can set all the accounts ON or OFF. Using the IP Phone UI, you can also press the "Copy to all modes" button
to copy a phone number to other phone number fields.
Note:
If there is only one account configured on the phone, then the mode setting is ignored and the phone behaves
as if the mode was set to "Phone".
3. Click to save your changes. The changes takes affect immediately without a reboot.
148
Call Forward
Key Mode
Parameter
41-001317-00 Rev 02 – 07.2010