Miele KWT 6322 UG Operating And Installation Instructions page 50

Miele|home
This appliance a/c is communication
enabled and can be connected to the
Miele|home system via a
communication module b (optional
accessory) and a conversion kit where
required.
The Miele|home system enables
communication enabled appliances to
send information via the household
wiring network to a master appliance c
such as an oven with SuperVision
function about their operational status,
as well as information about the
progress of the programme.
Displaying information and
controlling appliances
– SuperVision master appliance c
The status of other signed on
appliances can be shown in the
display of some communication
enabled appliances.
– Mobile appliance g
A PC, Notebook, Tablet PC or a
Smartphone can be used within the
reception area of a household WLAN
e to display status information about
signed on appliances and carry out
certain functions.
– Household network f
The Miele|home system enables
smart living. The Miele|home
Gateway d allows other
communication enabled appliances
to integrate into the household bus
system.
In Germany communication enabled
appliances can be integrated into
the QIVICON Smart Home Platform
50
instead of the Miele|home Gateway
(www.qivicon.de).
SmartStart
Smart grid enabled appliances can be
started automatically at a time when
electricity costs are favourable or when
a sufficient supply of electricity is
available (e.g. from a solar power
system).
Accessories required
– Communication module XKM3000Z
– Conversion kit for communication
system XKV (depending on
household appliance)
– Miele|home Gateway XGW3000
These accessories are supplied with
their own installation and operating
instructions.
Further information
Further information regarding
Miele|home is available on the internet
and in the instruction manuals of the
various components, e.g. the
Miele|home Gateway. Please note that
the Miele@home and SuperVision
system is currently only available in
selected countries.