Lighting Duration Of The Feature Lighting - Miele KWT 6322 UG Operating And Installation Instructions

Feature lighting
The selected brightness is saved for
both zones. The temperature reappears
in the display.
When the appliance door is closed, the
set brightness takes effect. When the
appliance door is opened, the interior
lighting returns to its normal level.
Lighting duration of the feature
lighting
The lighting duration for the feature
lighting is set to 30 minutes at the
factory.
The lighting duration can be set to 30,
60, 90 minutes, up to 00 (unlimited).
The feature lighting will have the
brightness setting you have selected
previously.
^ Open the appliance door.
^ Touch the On/Off sensor for the
feature lighting so that it is
highlighted in yellow.
^ Touch the sensor for the feature
lighting again (for approx. 2
seconds), until ^ flashes in the
display.
^ Use the X and Y sensors for altering
the temperature to set the feature
lighting duration. The duration (in
minutes) will flash in the display.
32
By touching the sensor
– lighting duration is reduced by 30
minutes
– lighting duration is increased by 30
minutes.
^ Touch the OK sensor to confirm your
choice.
The selected lighting duration is saved
for both zones. The temperature
reappears in the display.
The lighting duration set starts anew
whenever the appliance door is opened
and closed.
Do not remove the lighting covers.
Should the covers be damaged or
need to be removed due to
damage, exercise caution. There
are lasers in the lighting (laser beam
class 1M) which you should avoid
looking at directly. Do not use
optical instruments (magnifying
glass or similar) to look at the
lighting.