Temperature Display Brightness - Miele KWT 6321 UG Operating And Installation Instructions

Temperature display brightness

The default brightness for the
temperature display is set to ^1.
To change the brightness of the
temperature display (the temperature
displays will change together):
^ Touch and hold the constant humidity
sensor for approx. 5 seconds.
The sensor's indicator light flashes, and
the temperature display ; for the lower
section (display on the right) flashes.
^ Keep touching one of the
temperature setting sensors for the
upper section (left temperature
sensors) until you see ^ in the
display.
^ Touch the sensor for constant
humidity again.
^ will light up in the display.
Temperature and air quality
^ You can now change the brightness
of the display by touching the
temperature setting sensors for the
upper section. You can choose levels
of brightness from 1 to 5.
1: minimum brightness
5: maximum brightness
^ To save the setting, touch the
constant humidity sensor.
^ To exit settings mode, touch the
On/Off sensor or wait for approx. 2
minutes and the electronics will
automatically revert to normal
operation.
21