Setting The Temperature - Miele KWT 6322 UG Operating And Installation Instructions

Safety device in case of low ambient
temperatures
The appliance is equipped with a safety
thermostat to protect your wine against
a sharp drop in temperature. If the
external temperature should drop
below this level, a heater element
switches on automatically to keep the
temperature inside as constant as
possible. If the ambient temperature
continues to fall, the appliance switches
itself off automatically.
Isolator plate for thermal separation
The appliance has a fixed isolator plate
which divides the cabinet into two
different zones. This enables you to
store different types of wine at the same
time, e.g. red wine and champagne.
The isolation strips on the inside of the
glass door prevent an exchange of heat
between the individual zones.
Temperature and air quality

Setting the temperature

The temperature can be set in both
zones independently of each other.
^ Touch the sensor for the zone for
which you wish to change the
temperature, so that it is highlighted
in yellow.
The current temperature for the
selected zone appears in the display.
^ Set the temperature using the two
sensors underneath the display.
By touching the sensor
– the temperature will get colder
– the temperature will get warmer.
^ Touch the OK sensor to confirm your
choice.
or
^ wait approximately 5 seconds after
the last press of the sensor.
25