Active charcoal filter
To confirm the filter has been changed
^ Touch the settings sensor.
All symbols available for selection will
appear in the display and the 0 symbol
flashes.
^ Touch the sensors for setting the
temperature (X or Y) repeatedly until
the symbol flashes.
^ Touch the OK sensor to confirm your
choice.
The 1 will flash in the display (means:
Active charcoal filter is installed in the
appliance), the symbol lights up.
^ Touch the symbols for setting the
temperature (X or Y), until the 2
symbol is displayed (means: the
counter has been reset).
42
^ Touch the OK sensor to confirm your
choice.
The selected setting is applied, the
symbol flashes.
^ Touch the settings sensor to leave
settings mode.
Otherwise the appliance exits
settings mode automatically after
approximately one minute.
The Change active charcoal filter
indicator will go out.