Under-Counter Installation; Preparing The Appliance - Miele KWT 6322 UG Operating And Installation Instructions

Under-counter installation

Two people are required for installing
the appliance.
^ The appliance must be installed in a
stable and correctly aligned niche on
a level surface.
^ The niche must be horizontally and
vertically aligned.
^ The required ventilation
cross-sections must be ensured (see
"Installation - Ventilation" and
"Building-in dimensions").
To install the appliance, you will
need the following tools:
– Screwdrivers of various sizes
– Spirit level
– Tape measure
64
The following installation parts are
required:
– Ventilation grille
– Air filter
– Foam block for air intake through the
appliance plinth
– Screws to secure the appliance in
the niche
– Spanner to adjust height in the niche

Preparing the appliance

The air filter prevents soiling of the
compressor compartment to ensure
efficient functioning of the
appliance.
^ Carefully remove the protective foil
from air filter a.
^ Insert the air filter into the bottom left
of the appliance plinth.
^ Connect the appliance to the mains
electrical supply (see "Electrical
Connection").