Transfer A Call To A Third Party Already On Hold; Conference; Add A Party On Hold To A Call In Progress; Return To A Conference Call After Accepting An Outside Caller - Mitel 5360 SIP PHONE User And Administration Manual

Mitel 5360 SIP Phone User Guide

Transfer a Call to a Third Party Already on Hold

1. While on a call, press
2. Press the Line key of the call on hold, and then press
3. Hang up.

Conference

When two parties are connected on a call, either of those parties can originate a three-way
conference by adding a third party to the call in progress. Once three parties are connected,
no more parties can be added to that call.
A party can be involved in more than one three-way conference call at a time, but the calls
cannot be merged. For example, A and B are on a call. A adds C to create three-way
conference call ABC. B adds D to the call with A to make conference call ABD. ABC and ABD
remain separate– D is not added to conference call ABC.
To form a Conference when a two–party call is already in place, or to add another party
to an existing Conference:
1. Press
2. Dial the number of the next party.
3. Wait for an answer.
4. Press
To leave a Conference:

Hang up or press

Add a Party On Hold to a Call in Progress

1. Press
2. Press the Line key of the party already on hold.
3. Press
progress.

Return to a Conference Call after Accepting an Outside Caller

If the originator of a conference responds to a call from another party during a conference,
the other two conference members are put on hold.
To resume the conference, the originator must:
1. Select one of the held lines and then press
2. Select the remaining held line and then press
(TRANS/CONF). The call is put on hold.
(TRANS/CONF).
(TRANS/CONF).
(CANCEL).
(TRANS/CONF). The current call is put on hold.
(TRANS/CONF). The call put on hold in step 1 is connected to the call in
- 30 -
(TRANS/CONF).
(TRANS/CONF).
(TRANS/CONF).