Mute; Transfer - Mitel 5360 SIP PHONE User And Administration Manual

Mute

Mute lets you temporarily turn your phone's handset, headset or handsfree microphone off
during a call.
To turn Mute on during a call:

Press (MUTE). The
To turn Mute off and return to the conversation:

Press (MUTE). The
Note: If you are on a Handsfree MUTED call and you lift the handset, the handset microphone
is automatically enabled and the MUTE light turns OFF.
NOTE FOR USERS ON RESILIENT MCD SYSTEMS: If your phone switches to the secondary
system while your speaker or handset is muted (that is, while the Mute key is lit) the call
remains muted until you hang up.

Transfer

You can transfer an active call to another party (one line must be free on your phone). The
5360 SIP Phone supports four lines. If all lines are busy on your phone, no calls can be
transferred.
During a conference call, any party can perform a call transfer when one line
Note:
on the phone that initiated the conference call is not in use
To Transfer an active call:
1. Press
2. Dial the number of the third party.
3. Do one of the following:

To complete the Transfer, hang up.

To announce the Transfer, wait for an answer, consult, and hang up.

To cancel the Transfer, press
To transfer an active call during headset operation:
1. Press
2. Dial the number of the third party.
3. To complete the Transfer, press the Release feature key.
(MUTE) light turns ON.
(MUTE) light turns OFF.
(TRANS/CONF).
(TRANS/CONF).
- 29 -
Mitel 5360 SIP Phone User Guide
(CANCEL).
.