Switch Between Handset And Headset; Switch Between Headset And Handsfree; People; Rss Feed - Mitel 5360 SIP PHONE User And Administration Manual

Switch between Handset and Headset

To go from handset to headset mode:
1. Lift the headset from its cradle.
2. Hang up the handset. Use the headset to communicate with your party.
To go from headset to handset mode:
1. Lift the handset.
2. Replace the headset in its cradle. Use the handset to communicate with your party.

Switch between Headset and Handsfree

To go from headset to handsfree mode:

Press (SPEAKER). Use the handsfree speaker to communicate with your party.
To go from handsfree to headset mode:

Press (SPEAKER). Use your headset to communicate with your party.

People

The People Application is a scrollable list of contacts from which you can make a call. The
5360 SIP Phone holds a maximum of 50 People contacts. Using the User Web Configuration
tool, the maximum is 60 contacts, but only 50 will display on the phone set.
People entries contain the contact's name (maximum of 20 characters) and number, SIP
URL, or IP address.
The SIP URL and IP Address are programmable from the Web Configuration
Note:
Tool only.
To create and modify entries in the People Application, see
on page 19.
To create, modify, or make calls from your People using the Web Configuration Tool, access
the tool's People page (see

RSS Feed

RSS feeds (or "web feeds") are text formats used to deliver information such as news and
weather reports. Your Mitel SIP Phone can act as an RSS feed reader, displaying the feed on
Line 1 of the phone display when the phone is idle. You can program one or more keys on
your phone to display an RSS feed or to display your own customized message (branding).
Use the Key Programming Page in the Web Configuration Tool to program one or more RSS
feed keys. For more information, refer to the Web Configuration Tool Online Help.
Accessing the Web Configuration Tool
- 33 -
Mitel 5360 SIP Phone User Guide
Setting Up Your Contact List
on page 13).