Table of Contents
Advertisement
Table 6. Service Processor Error Codes. (continued)
214
Service Guide
Error Code Description
4066 00A6 Scan interface basic assurance tests
detected no usable memory
4066 00A7 Scan interface basic assurance tests
detected hardware problem
4066 00B0 Scan interface basic assurance tests
detected bus controller lock-unlock
failure
4066 00B1 Scan interface basic assurance tests
detected bus controller failure
4066 00B7 Scan interface basic assurance tests
detected insufficient hardware
resources to continue IPL
4066 0100 Scan interface basic assurance tests
detected memory riser card fault
4066 0101 Scan interface basic assurance tests
detected memory DIMM fault
4066 0102 Scan interface basic assurance tests
detected memory DIMM fault
4066 0103 Scan interface basic assurance tests
detected memory DIMM fault
4066 0104 Scan interface basic assurance tests
detected memory DIMM fault
4066 010D Scan interface basic assurance tests
detected memory DIMM fault
4066 0111 Scan interface basic assurance tests
detected memory DIMM fault
4066 0112 Scan interface basic assurance tests
detected memory DIMM fault
4066 0113 Scan interface basic assurance tests
detected memory DIMM fault
Action/
Possible Failing FRU
1. Ensure that memory DIMMS and
cards are properly installed
2. Go to service processor Memory
Configuration/Deconfiguration
menu to verify memory DIMMs
state. See "Memory
Configuration/Deconfiguration
Menu" on page 384 for more
information.
3. Go to "MAP 1540: Minimum
Configuration" on page 113.
Go to "MAP 1540: Minimum
Configuration" on page 113.
RIO adapter
Location: U0.1-P1.1
RIO adapter
Location: U0.1-P1.1
This error code appears after the
initial testing by the service processor
firmware on the CEC was completed
correctly, but a problem occurred
when the firmware tried to
communicate outside the CEC.
Suspect a problem with the RIO
interface, either cables or adapters.
Memory riser card
Location: U1.1-P1-M2
Memory DIMM
Location: U1.1-P1-M2.15
Memory DIMM
Location: U1.1-P1-M2.1
Memory DIMM
Location: U1.1-P1-M2.16
Memory DIMM
Location: U1.1-P1-M2.2
Memory DIMM
Location: U1.1-P1-M2.1 x4
Memory DIMM
Location: U1.1-P1-M2.13
Memory DIMM
Location: U1.1-P1-M2.3
Memory DIMM
Location: U1.1-P1-M2.14
Advertisement
Table of Contents
