Table of Contents
Advertisement
Internal Disk Drives
Removal
1. Turn off power as described in "Powering Off the System" on page 427.
2. Place the I/O drawer in the rear service position as described in "Rear Service
Position" on page 465.
3. Remove the two thumbscrews and remove the back top cover.
4. Remove the screw from the back of the disk drive carrier.
5. Slide the carrier forward and remove. The carrier has keyed slots that engage
mounting posts on the chassis.
6. Make a note of how the disk drives are connected before disconnecting. Disconnect
the internal cables from the drives.
7. If you are replacing a defective boot drive, remove the mounting screws from the
carrier.
456
Service Guide
1
2
3
Advertisement
Table of Contents
