IBM 6H0 Service Manual page 177

Table 2. Firmware Checkpoints (continued)
Checkpoint Description
E604 SSA PCI adapter BIST and
subsequent POSTs have completed
successfully.
E605 SSA PCI adapter BIST has
completed successfully but the
subsequent POSTs have failed.
E60E SSA PCI adapter open firmware
about to exit (no stack corruption).
E60F SSA PCI adapter open firmware
has run unsuccessfully.
E6FF SSA PCI adapter open firmware
about to exit (with stack corruption).
E700 Create system firmware VPD
E701 Create memory VPD.
E702 Create processor card VPD.
E703 Create operator panel VPD.
E704 Create CEC VPD.
E705 Create clock card VPD.
E706 Create RIO extender card VPD.
E707 Create system VPD.
E708 Create RIO to PCI adapter VPD.
E709 Create VPD via SPCN.
E70A Create service processor VPD.
Action/
Possible Failing FRU
Replace the adapter. See
"Checkpoint and Error Code Index"
on page 165 for location code
information related to this error.
Replace the adapter. See
"Checkpoint and Error Code Index"
on page 165 for location code
information related to this error.
Replace the adapter. See
"Checkpoint and Error Code Index"
on page 165 for location code
information related to this error.
Replace the adapter. See
"Checkpoint and Error Code Index"
on page 165 for location code
information related to this error.
Replace the adapter. See
"Checkpoint and Error Code Index"
on page 165 for location code
information related to this error.
Replace the primary I/O drawer
backplane, location: U0.1–P1.
Go to "MAP 1540: Minimum
Configuration" on page 113 to
isolate the failing memory
components.
Replace the processor card,
location: U1.1–P1–C1. See the note
on page 139.
1. Replace the operator panel,
location U0.1–L1. See
"Replacing the Primary Drawer
Operator Panel" on page 163.
2. Replace the primary I/O drawer
backplane, location: U0.1–P1.
See the note on page 139.
See the note on page 139.
Replace RIO extender card. See
the note on page 139.
See the note on page 139.
See the note on page 139.
See the note on page 139.
Replace the primary I/O drawer
backplane, location: U0.1–P1.
Chapter 4. Checkpoints
157