Closing Windows If The Control Pad Has Been Mislaid - Velux KLR 200 User Manual

®
VELUX INTEGRA
KLR 200
Operation
Operation without using the control pad

Closing windows if the control pad has been mislaid

If your control pad has been mislaid, you can still close your window by carrying out the following actions.
Note: This feature is only available for the products shown.
Centre-pivot windows
Determine window type
1 A
page. Disengage the chain according to window type.
Press the test button on the window operator briefly. Wait
2
until the chain stops moving then close the window manually.
Flat roof windows
Carefully remove the cover cap on the kerb.
1
Press the test button on the window operator behind the cover
2
cap briefly and refit the cover cap.
Top-hung windows
Remove the cover of the window operator.
1
Press the test button on the window operator briefly and refit
2
the cover.
or as shown on the previous
B
1
2
1
1
2
A
B
2
2
VELUX 37