Repositioning The Rain Sensor In Case Of Retrofitting - Velux KLR 200 User Manual

®
VELUX INTEGRA
KLR 200
Installation

Repositioning the rain sensor in case of retrofitting

Retrofitting a VELUX INTEGRA
onto a VELUX INTEGRA ® centre-pivot window
If you want to retrofit a VELUX INTEGRA
ing blind onto your VELUX INTEGRA
must reposition the rain sensor to the side channel of the roller
shutter or the awning blind.
Note: The mains or battery supply must be switched off while
repositioning the rain sensor.
Move the rain sensor from window side cover to roller shutter
1
or awning blind side channel.
Important: The surface to which the rain sensor is to be ad-
hered must be clean and dry.
Lead the cable under roller shutter or awning blind without
2
pulling it tight.
Lead the cable into the window as shown.
3
®
roller shutter or awning blind
® roller shutter or awn-
®
centre-pivot window, you
1
SML
1
MML
3
4
2
2
VELUX 115