Closing Centre-Pivot Windows In Case Of Power Failure Or Discharged Battery - Velux KLR 200 User Manual

®
VELUX INTEGRA
KLR 200
Operation
Operation without using the control pad
Closing centre-pivot windows in case of power failure or dis-
charged battery
In case of power failure or discharged battery, you can close your
centre-pivot window manually by disengaging the chain on the venti-
lation flap of the window.
There are two different ways of doing this, depending on window
type, where the ventilation flap can look like
how to disengage the chain on the ventilation flap according to your
window type.
A
The ventilation flap of the window looks like
Disengage the chain by pressing the release clip on the flap
1
bracket.
Remove the flap bracket.
2
Fold the chain as shown, and close the ventilation flap of the
3
window to ventilation position.
B
The ventilation flap of the window looks like
Disengage the chain by pressing the release clip on the flap
1
bracket.
Fold the chain as shown, and close the window manually.
2
When the power has been reconnected or the battery has been
recharged, you must re-engage the chain.
• Open the window manually and unfold the chain.
• Replace the flap bracket if the ventilation flap looks like
• Run back the chain by pressing the test button on the window
operator briefly.
• Close the window manually.
A
or . See below on
A B
1
:
A
3
1
:
B
2
.
A
2
B
2
VELUX 36