Table of Contents
Advertisement
S
S
UPER
ERVER 5015M-UR/5015M-U/5015M-NTR/5015M-NT User's Manual
Rebuilding Arrays
Notes: Rebuilding applies to Fault Tolerant arrays (RAID 1) only.
If an array build process is interrupted or when one critical member is missing,
you must perform a Rebuild to restore its functionality. For a critical array rebuild
operation, the optimal drive is the source drive.
If no spare array exists and a hard disk drive fails, you need to create a spare
before you can rebuild an array.
To Rebuild an array
1. From the Main Menu, select Manage Arrays (as shown in the screen below).
From the List of Arrays, select the array you want to Rebuild.
2. Press <Ctrl> and <R> to Rebuild.
D-14
Advertisement
Table of Contents
