snom UC Edition and snom 720
•
Figures H-1 to H-3:
In Fig. H-1 the connected call is on-screen. Press
◦
screen.
In Fig. H-2 the first held call of a total of two (1/2) is on the screen. Press
◦
put the second held call (2/2) on the screen (Fig. H-3).
Press
◦
When a held call is on-screen, press
◦
on hold.
•
Figures H-4 to H-6:
◦
In Fig. H-4 the first held call of a total of three Calls on Hold (1/3) is on-screen. Press
to put the second held call on the screen.
◦
In Fig. H-5 the second held call (2/3) is on the screen. Press
held call (3/3) on the screen (Fig. H-6). If there are more held calls, continue likewise.
◦
Press
To connect to the held call currently on-screen, press
◦
•
When the connected call is on-screen, you can terminate it by pressing .
•
You can transfer the on-screen call, whether connected or held. See "Transferring calls" on page
51 for more information.
to scroll back to the connected call (Fig. H-2 and H-3).
to scroll back through the held calls (Fig. H-6 and H-5).
to put the first held call on the
to connect to it and put the current connected call
.
51
Hold
again to
again to put the third