Special Recording Functions; Hot Swap Recording; Shot Mark Recording Function; Text Memo Recording Function - Panasonic Vericam 35 Operating Manual

Special recording functions

Hot swap recording

When P2 cards are inserted into two card slots, recording can be performed continuously across two cards.
Also, the card other than the one currently being recorded to can be swapped and recording can be continued on three or more cards (hot swap
recording).
However, P2 card recognition might slow down depending on the timing (before and after continuous recording across two card slots) that the P2 card is
inserted into the vacant card slot. When inserting a P2 card, make sure that there is at least one minute of free space on the card to be recorded to.
@ NOTE
t Hot swap playback is not supported.

Shot mark recording function

Shot mark is the mark added to the thumbnail of each clip to distinguish that clip from others.
Only clips with shot marks attached can be displayed or played back.
Adding shot marks
1
From [MENU] → [SYSTEM SETTINGS] → [USER SWITCHS], set [SHOT MARK] for any setting from [USER1] to [USER4].
2
During recording or while a clip is selected in the PLAY screen, press the button to which the shot mark is assigned.
f [MARK ON] is displayed, and the short mark is added to the recorded clip.
f Another press of the button displays [MARK OFF] and the shot mark disappears.
@ NOTE
t To add shot marks to combined clips, such as those recorded over multiple P2 cards, or delete them, there are following restrictions.
- All P2 cards constituting clips must be inserted into the slots.
- A shot mark is added only to the top clip among combined clips.

Text memo recording function

Text memos can be added to any video point.
Adding text memos
1
From [MENU] → [SYSTEM SETTINGS] → [USER SWITCHS], set [TEXT MEMO] for any setting from [USER1] to [USER4].
2
During a pause or while a clip is selected in the PLAY screen, press the button to which the text memo is assigned.
[TEXT MEMO] is displayed, and the text memo is added to the video clip that was displayed when the button was pressed.
@ NOTE
t Up to 100 text memos can be recorded to a single clip.
Chapter 4 Video Recording and Color Grading — Special recording functions
– 41 –