Panasonic Vericam 35 Operating Manual page 88

Item
[EXTENDER]
[Y GET]
[TC]
[P2 CARD REMAIN]
[BATTERY REMAIN]
[PROXY]
[GPS]
[MON OUT MARKER] [MON OUT1 SW]
[MON OUT2 SW]
[LCD SW]
[CENTER MARKER]
[SAFETY MARKER]
[SAFETY AREA]
[FRAME MARK]
[FRAME SIG]
[FRAME LEVEL]
[MARKER & CHAR LVL]
[USER BOX]
[USER BOX WIDTH]
[USER BOX HEIGHT]
[USER BOX H POS]
[USER BOX V POS]
Chapter 10 Menu Operations — Menu list
Displays/hides the extender.
[ON], [OFF]
f Factory setting: [ON]
Displays/hides brightness of Y GET.
[ON], [OFF]
f Factory setting: [ON]
Displays/hides the time code, user bits, and duration counter displays.
[TCG/TCR], [TCG], [OFF]
f Factory setting: [TCG/TCR]
Displays/hides the display of the remaining recording free space of a P2 card.
[ON], [OFF]
f Factory setting: [ON]
Displays/hides the estimated remaining battery charge level.
[ON], [OFF]
f Factory setting: [ON]
Displays/hides proxy information.
[ON], [OFF]
f Factory setting: [ON]
Displays/hides GPS signal reception status.
[ON], [OFF]
f Factory setting: [ON]
Displays/hides markers for the output from the <MON OUT1>.
[ON], [OFF]
f Factory setting: [OFF]
Displays/hides markers for the output from the <MON OUT2>.
[ON], [OFF]
f Factory setting: [ON]
Displays/hides markers for the control panel.
[ON], [OFF]
f Factory setting: [ON]
Controls the center mark.
[1]: + (large)
[2]: Open center (large)
[3]: + (small)
[4]: Open center (small)
[OFF]: Does not display.
f Factory setting: [1]
Selects the type of frame for the safety zone marker.
[1]: Box
[2]: Corners
[OFF]: Does not display.
Factory setting: [OFF]
Sets the size of the safety zone marker.
[80%] - [100%] (1% step, fixed aspect ratio)
f Factory setting: [90%]
Enables/disables frame marker.
[ON], [OFF]
f Factory setting: [OFF]
Sets frame marker aspect ratio.
[1.33:1], [1.44:1], [1.56:1], [1.78:1], [1.85:1], [2.35:1]
f Factory setting: [2.35:1]
Sets the level of the outside of the frame marker.
[0%] - [100%] (10% step)
f Factory setting: [100%]
Sets the marker and character luminance.
[50%]...[100%] (10% step)
f Factory setting: [70%]
Displays/hides the user box.
[ON], [OFF]
f Factory setting: [OFF]
Sets the width of the user box.
[1]...[100]
f Factory setting: [13]
Sets the height of the user box.
[1]...[100]
f Factory setting: [13]
Sets the horizontal position of the center of the user box.
[−50]...[50]
f Factory setting: [0]
Sets the vertical position of the center of the user box.
[−50]...[50]
f Factory setting: [0]
– 88 –
Description of settings