Convenient Shooting Functions; Zebra Patterns Display; Displaying The Center Marker; Displaying The Safety Zone Marker - Panasonic Vericam 35 Operating Manual

Table of Contents

Advertisement

Convenient shooting functions

Zebra patterns display

The camera can display two types of zebra patterns.
The level for zebra pattern display can be set in [MENU] → [VF SDI SETTINGS] → [ZEBRA].
Item
[ZEBRA MASTER SW]
[ZEBRA2 SW]
[ZEBRA1 DETECT]
[ZEBRA2 DETECT]
[SPOT]: The image level from the setting value of [ZEBRA1 DETECT] to the setting value of [ZEBRA2 DETECT] is displayed in the zebra pattern.

Displaying the center marker

The marker is displayed when a setting other than [OFF] is set in [MENU] → [VF SDI SETTINGS] → [MARKER] → [CENTER MARKER].

Displaying the safety zone marker

Items selected in [MENU] → [VF SDI SETTINGS] → [MARKER] → [SAFETY MARKER] are displayed.
The size of the safety zone marker can be changed in [MENU] → [VF SDI SETTINGS] → [MARKER] → [SAFETY AREA].

Displaying frame marker

The marker is displayed when [MENU] → [VF SDI SETTINGS] → [MARKER] → [FRAME MARK] is set to [ON].
Set the view angle in [MENU] → [VF SDI SETTINGS] → [MARKER] → [FRAME SIG].
Set the outside level in [MENU] → [VF SDI SETTINGS] → [MARKER] → [FRAME LEVEL].

Focus assist function

The focus assist function enables you to focus the target easily.
Enlarged display in the output image from the viewfinder or <VF SDI> terminal, peaking display (display with the contours of the image in red), focus
square display (display in the size of a square displayed in each area), and focus bar display are available.
Expanded display
Set [MENU] → [VF SDI SETTINGS] → [ASSIST] → [EXPAND SW] to [ON].
Chapter 7 Viewfinder — Convenient shooting functions
Sets whether to superimpose the zebra signal on the output from the <VF> terminal and <VF SDI>
terminal.
[ON], [OFF]
f Factory setting: [OFF]
Enables/disables zebra pattern 2 and selects [SPOT].
[ON], [SPOT], [OFF]
f Factory setting: [OFF]
Sets the detection level of zebra pattern 1.
[0%]...[109%]
f Factory setting: [80%]
Sets the detection level of zebra pattern 2.
[0%]...[109%]
f Factory setting: [100%]
Image level
[ON]
[109%]
[ZEBRA2 DETECT]
[ZEBRA1 DETECT]
[0%]
Description of settings
[ZEBRA2]
[OFF]
[SPOT]
– 63 –

Advertisement

Table of Contents
loading

This manual is also suitable for:

Varicam hs

Table of Contents