Operating Procedure - Panasonic Vericam 35 Operating Manual

Connection example for supplying to external device
r When locking external devices to the camera
r When two cameras are connected and one is used as a reference camera
When using two cameras in which one is used as a reference camera to slave the time code, make the connection as follows.
Reference camera
<TC IN/OUT> terminal
<SDI OUT1> terminal
@ NOTE
t Sets the <TC IN/OUT> terminal to output or input in [MENU] → [REC SETTINGS] → [TC] → [TC IN/OUT SEL].
t By setting [MENU] → [REC SETTINGS] → [TC] → [TC OUT REF] to [RECORDING] on both cameras, the two cameras will be able to record with the
same time code on the video at the same time.

Operating procedure

1
From [MENU] → [REC SETTINGS] → [TC] → [TC IN/OUT SEL], set [TC OUT].
f To match the time code output from the <TC IN/OUT> terminal to the SDI output and monitor output image, set [MENU] → [REC SETTINGS] →
[TC] → [TC OUT REF] to [SDI OUT].
f To output TCR during playback, set [MENU] → [REC SETTINGS] → [TC] → [TC OUT] to [TCG/TCR].
These settings are not required, if the internal device uses LTC or VITC output multiplexed to the SDI output.
Chapter 9 Other Useful Functions — Setting the time data
<SDI OUT1>/<SDI OUT2>/<SDI OUT3>/<SDI OUT4> terminal
<TC IN/OUT> terminal
<TC IN/OUT> terminal
<GENLOCK IN> terminal
– 80 –
VIDEO IN terminal
SDI IN terminal
HD SDI IN terminal
VTR, etc.
TC IN terminal
Slave camera